This harness can be used to repair or replace a cut or damaged factory harness.

Most likely WILL NOT work to turn on many factory radios if the radio is not used on the original vehicle since the factory radio might be turned on with a digital signal which this harness does not have the capability of doing.  

All wires WILL NOT be present on this harness- ie. can bus, illumination, etc wires are not on the harness- if you want all wires to be on the harness then you should use the Metra 71-6522.

Factory radios that have a seperate factory amplifier (amplified system) may not work correctly since the wire output might only be a pre-amp low signal that will not amplify speakers.

Plugs into the factory OEM Chrysler/Dodge/Jeep radios.

Works with many Chrysler radios.

Will not work with all radios- make sure your connector looks like the one in the picture.