Metra Axxess XSVI-9003-NAV VW Wire Harness w/Nav OutPut
Product Code: xsvi9003nav
Our Price: $44.00
Description
Use this adapter to replace your factory radio. Big time saver and prevents you from having to cut your factory wiring. Amplified, Non-amplified interface harness that retains accessory power and provides navigation output wires. . -Provides 12vdc accessory output -Does not retain warning chimes -Provides outputs for VSS, Parking brake and reverse The XSVI series interface is an inexpensive solution that provides +12-volt accessory power output for select vehicles that data control signals instead of conventional power signals. If the vehicle is equipped with retained accessory power features, the XSVI will keep those features. Also provides outputs for VSS, Reverse, and Parking Brake. The listed VW vehicles have no 12 volt accessory wires in the factory radio harness making the installer run an accessory wire to the fuse box or underneath the steering column when installing an aftermarket radio. The XSVI-9003-NAV is designed to provide a 12 volt 10 amp switched accessory output along with the rest of the wires needed to install an aftermarket radio. The R.A.P. (Retained Accessory Power) function is retained by the XSVI-9003-NAV. The XSVI-9003-NAV also provides essential wires required for aftermarket radios that have navigation. Provided is VSS (Vehicle Speed Sense), Reverse, and Parking Brake- This cuts down the installation time since the installer does not have to look for these wires in the vehicle. In 2005 and older VW’s the navigation information (VSS, Parking Brake, and Reverse) is not available on the CAN Bus therefore the XSVI-9003-NAV will not provide it. Works with the following vehicles: VW: 2007-2008 EOS 2002-2008 Golf/GTI 2002-2008 Jetta/GLI 2002-2008 Passat 2006-2008 Rabbit 2008 Tiguan